GENERAL CHARACTERISTICS :
Details
Synthetic washing oil with a set of effective detergent additives. It is recommended to use for washing the engine and transmission when switching to ZIC oil after using oils of other manufacturers or when switching from mineral oil to semi-synthetic or synthetic oil. It is also recommended to use periodically to maintain the engine and transmission parts in a clean condition. It is based on Yubase’s own synthetic base oil used for the production of ZIC lubricants. Helps to restore fuel economy, increase the working efficiency of the engine, reduce harmful emissions
APPLICATION INSTRUCTIONS
To flush the engine: – after warming up to the operating temperature, drain the waste oil; – Fill the engine with oil to the lower level on the dipstick; – Start the engine and leave it idling for 15-20 minutes (wash time should not exceed 30 minutes, during the washing, increased engine speed and vehicle movement are prohibited); – muffle the engine and drain the flushing oil. Replace the oil filter. Fill with new engine oil. To flush the transmission units: – hang out the drive wheels, drain the waste transmission oil and fill the flushing oil, start the engine and start the first gear for 5 minutes (during the washing, the car is not allowed to move); – Switch off the engine, drain the flushing oil, and fill the new gear oil. It has excellent detergent properties and is absolutely safe for sealing compounds made of polymer materials. Increases the service life of the engine and transmission. Excellent dissolves deposits in engines and effectively cleans up stuck valves and rings. Longer retains the properties of the oil, preventing its accelerated oxidation, caused by the presence of residues of the old oil. Promotes quiet and soft engine operation, removing the sludge, reduces the operating temperature in the high-temperature zones of the engine. It is based on Yubase’s own synthetic base oil used for the production of ZIC lubricants. Helps to restore fuel economy, increase the working efficiency of the engine, reduce harmful emissions.
Technical Info
| Flush oil | |
|---|---|
| 0.84 | Density at 15 ° C, g / cm3 |
| 22.3 | Kinematic viscosity at 40 ° С, mm2 / s |
| 4.7 | Kinematic viscosity at 100 ° С, mm2 / s |
| 135 | Viscosity index |
| Flash point, ° С | Flash point, ° С |
| -47.5 | Pour point, ° C |